1. Desizing: At present, most denim is softened by cellulase rinsing. In the production of denim, no matter how thick or thin it is, the warp yarn will be coated with a kind of corn starch slurry during the weaving process to improve the stiffness of the yarn. During desizing, cellulase can decompose the size on denim and make the size peel off. Although desizing will slightly fade denim, it will improve the softness and drapability of denim. The light denim after desizing can be made into tablecloth or napkin cloth with soft hand and good drape.

Today, we will talk about the process of textile washing water treatment? I hope the following content can be helpful to everyone. The wastewater first passes through the rotary fine grid and enters the sand settling tank. After the sand settling, the wastewater is lifted and filtered out by a circular mesh filter to remove impurities such as fibers, and then flows into the regulating tank. After the addition of a new mobile pump sludge suction machine, the sludge deposited in the regulating tank will be discharged outside the tank

After coating application, the volatilization rate of mixed solvents in the initial wet film state is mainly affected by the volatilization performance of each solvent, and the volatilization rate is similar to that of pure solvents. The relative volatilization rate of various solvents can be consulted for reference in literature. As the solvent evaporates, the viscosity of the coating increases, the evaporation rate of the solvent gradually slows down, and the wet evaporation tends to end. The wet evaporation rate of solvents is closely related to four variables: temperature, vapor pressure, surface area to volume ratio, and air flow rate passing through the surface; Water-based coatings use water as the volatile component, and relative humidity is also a significant variable.

Experts in the fluorescent whitening agent industry have learned that the technical level of fluorescent whitening agent production in China has reached the world's advanced level. Fluorescent brighteners are mainly used in four major fields in China: detergents, papermaking, textiles, and plastics. Among them, 40% are used in the detergent industry, 30% in the paper industry, 25% in the textile industry, and the plastic industry accounts for 5% of the total. It is understood that fluorescent brighteners in China have been industrialized since the 1950s.

The purpose of clothing washing is to enhance the stability of clothing. By washing with water, it is possible to shrink in advance and stabilize the size. The second is to enhance the aesthetics of clothing. By using different washing methods, various colors and textures can be washed, which is highly favored by people and increases the added value of clothing. So, what chemicals are used in the washing process of clothing?

The commonly used pre-treatment additives include desizing agents, cleaning agents, scouring agents, penetrating agents, oxygen bleaching stabilizers, chelating agents, etc. Most of these additives are surfactants, organic compounds, inorganic salts, and solvents. The most commonly used surfactants are anionic and non ionic surfactants, and there are also a small amount of amphoteric surfactants.