Basic traits

Appearance: milky white liquid

Solid content: 30 ± 1%

PH value: 2.5-3.5

Ionic characteristics: non ionic

Viscosity: 6200-6700

Dilute this product to a solid content of 1%, then adjust the pH value to 8 5, 3 # rotor/14rpm)

Product Description

This product is a cross-linked lotion thickener formed by copolymerization of high molecular polymers

Characteristics and Applications

1. Emulsified silicone oil defoamer, recommended dosage is 1-3%

2. The recommended amount for fabric coating is 0.5-1%

3. For pigment printing, it is recommended to add 1-3%

4. The recommended amount of pressure sensitive adhesive lotion is 0 5-1%

5. The recommended amount of emulsion paint for interior and exterior walls is 0 2-0.6%

Suggested Usage

Adjust the pH value of the coating with ammonia water to reach 8.0-8 5

Dilute this product with water in a ratio of 1:4 to water

Slowly add the diluted wooden product in a low-speed stirring state:

While stirring, observe the viscosity change of the coating. After reaching the specified viscosity, stop adding the thickener

【 Precautions 】

Not edible, avoid contact with the eyes

Packaging and Storage

Non hazardous goods, packaged in plastic bags in 125kg plastic drums

Prevent direct sunlight, transport and store at temperatures above 5C, and have a shelf life of 12 months